This page contain products for purchase.
Seismo-Quake® Temperature Control
267 x 180 x 80 millimeters (10.68 x 7.2 x 3.2 inches)
|What is the Seismo-Quake® Temperature Control ?|
Seismo-Quake® Temperature Control add to the fun factor in electronics and the design thereof with the subject of a temperature sensor, a sensor and control circuit with intelligent decision capability and a means of creating a flow of air. Establish electrical power to your Seismo-Quake® Temperature Control, set the control temperature and your Seismo-Quake® Temperature Control will automatically control the movement of air surrounding an object as it attempt to keep the ambient temperature constant !
Seismo-Quake® Temperature Control consist of a pre-assembled printed circuit board (PCB) with the Seismo-Quake® Sensor Board forming the heart of the Seismo-Quake® Temperature Control circuitry. The input consist of an external temperature sensor measuring the ambient temperature in degrees Celsius. The Seismo-Quake® Sensor Board form the process circuit and determine at which point in temperature the output is switched on or off.
|Key Features - Technical|
Electrically safe to use with no alternating current (AC) mains connection.
Power source is a 9 Volt (or PP3) battery (not included).
Input and output reverse polarity protection build in on the printed circuit board (PCB) of the Seismo-Quake® Sensor Board.
No voltage regulation applied on the Seismo-Quake® Sensor Board.
Safe maximum supply voltage of 16VDC for the Seismo-Quake® Sensor Board.
In standby mode Seismo-Quake® Sensor Board achieve in the region of 7.5mADC.
Functional operating ambient temperature of 0ºC to +70ºC for the Seismo-Quake® Sensor Board.
Seismo-Quake® Temperature Control provide an excellent foundation to gain further understanding in the field of electronics and electronic components.
Seismo-Quake® Temperature Control may be implemented in control circuitry with different sensors to choose from, thermistor with a positive temperature coefficient (PTC), thermistor with a negative temperature coefficient (NTC).
Where an external device need to be controlled and switched on and off according to a set temperature value.
Seismo-Quake® Temperature Control may be used in applications where a larger current need to be switched with the aid of a relay, maybe driving a solenoid.
Provide additional expansion for hobby model enthusiasts.
Assembling the Seismo-Quake® Temperature Control, add electrical power to the intelligent decision sensor circuit and add the necessary sensor to control the temperature and add the fan as cooling mechanism.
|Hints and Tips|
For a more economical approach use NiMH rechargeable batteries.
The last time this page was modified, was: 9:54 pm, 16 Jul 2018
Copyright © Seismo-Quake®. All Rights Reserved.
All other brand names are trademarks or registered trademarks and are the property of their respective owners. All information is subject to change without notice.
|International Phone||+27 72 703-3235||SAST||09H00||17H00|
|International Fax||+27 86 501-6592||SAST||00H00||24H00|
|National Phone||072 703 3235||SAST||09H00||17H00|
|National Fax||086 501 6592||SAST||00H00||24H00|